Claude Skill

detect-task

投前 AI 图真实性质检。待检图 → 风险等级 + 8 项逐条判定 + 可直接追加到 prompt 的修正句,可自动重跑直到达标。当用户说「投前检测」「图片质检」「检查有没有崩」「上架前把关」「这图能不能用」时使用。

LLM Mart · 0 points · 2 views 0 listing impressions 0 install-command copies
Download dlazy-ai-ecommerce-skills-skills_detect-task-c022f20.zip · 35 KB

Install

skills CLI npx skills add https://github.com/dlazy-ai/ecommerce-skills/tree/main/skills/detect-task
Claude Code claude plugin marketplace add https://llmmart.ai/marketplace.json && claude plugin install dlazy-ai-ecommerce-skills@llmmart
Git git clone https://github.com/dlazy-ai/ecommerce-skills.git

The skills CLI installs just this skill, for any of its supported agents. Claude Code installs the whole dlazy-ai/ecommerce-skills collection as a plugin from our marketplace. Git is the plain clone.

Skill manifest

detect-task — 投放前 AI 图真实性检测

AI 生图上架前的最后一道关。判断这张图能不能直接投,崩在哪里,怎么修。

和其他技能的区别:本技能不生成图片,输出的是判断。它的价值在于把「生成 → 检测 → 重跑」闭起来——检测报告里直接给出该追加到 prompt 的修正句。


生成效果示例

输入:待检图
candidate.jpg — 由 flat-lay 生成的军绿毛衣模特上身图,1024×1536

实际执行的命令:

dlazy claude-sonnet-5 \
  --prompt '你是电商投放前的图片质检员。审查这张 AI 生成的服装商拍图能否直接用于电商投放。全部用中文作答(第 4 项的 prompt 修正句除外)。严格按以下结构输出:
## 1. 风险等级
低风险 / 中风险 / 高风险(三选一)
## 2. 风险项逐条判定
用表格输出,三列:风险项 / 结论(通过 或 命中)/ 证据。风险项固定为这 8 条:商品崩坏、人脸不自然、手部异常、肢体结构错误、文字乱码、光影矛盾、边缘融合痕迹、平台合规。
## 3. 投放建议
建议投放 / 建议重跑 / 建议人工修图
## 4. 修正建议
若建议重跑或人工修图,给出应追加到生成 prompt 的英文修正句 1-3 条;若建议投放,写「无需修正」。
只输出报告,不要寒暄。' \
  --images docs/detect-task/candidate.jpg \
  | python3 -c 'import sys,json;print(json.load(sys.stdin)["result"]["data"]["texts"][0])' \
  > docs/detect-task/example-report.md

输出:完整报告见 docs/detect-task/example-report.md,3 credits。摘要:

  • 风险等级:低风险
  • 8 项判定:7 项通过;文字乱码 命中(轻微)——左侧袖口的织标图案模糊不可辨
  • 投放建议:建议人工修图(仅需局部处理袖口小标签)
  • 修正建议:clear and legible brand tag/logo embroidery on cuff, sharp fine detail, no blurry or garbled text

这条修正句可以直接追加到 flat-lay 的原 prompt 末尾重跑——这就是闭环。


1、能力边界

输出 说明
风险等级 低风险 / 中风险 / 高风险
风险项逐条判定 8 项,每项给出 通过 / 命中 + 一句证据
投放建议 建议投放 / 建议重跑 / 建议人工修图
修正建议 可直接追加到生成 prompt 的英文修正句

8 项风险清单

# 风险项 看什么
1 商品崩坏 款式、织法、印花、logo 位置是否失真
2 人脸不自然 五官比例、皮肤质感、眼神
3 手部异常 手指数量与形态
4 肢体结构错误 肩线、四肢数量与朝向
5 文字乱码 画面内任何文字
6 光影矛盾 投影方向与光源是否一致
7 边缘融合痕迹 抠图边、鬼影、糊块
8 平台合规 是否含违规元素

不做:不替代人工终审(模型判断有误报漏报);不做法律与平台规则的最终裁定;不用于给明显违规的图背书。


2、报告要能直接驱动重跑

检测的意义不是打分,而是告诉生成环节要改什么。所以报告的第 4 项必须是可直接复制到 prompt 的英文句子。

典型映射:

命中项 应追加到生成 prompt 的修正句
商品崩坏 Cross-check the garment against the reference: [关键特征] must match exactly.
人脸不自然 Photorealistic human face: correct facial proportions, natural skin pores and subsurface scattering, natural gaze.
手部异常 Hands anatomically correct — five distinct fingers per hand, natural knuckles, no fused or extra digits.
肢体结构错误 Correct anatomy: symmetric shoulders, two arms and two legs, no extra or missing limbs, no impossible joint angles.
文字乱码 No text anywhere in the image. 或(需要文字时)All text must be clear, correctly formed [语言] characters.
光影矛盾 Single consistent light source from [方向]; all shadows must fall in the same direction.
边缘融合痕迹 Blend all edges seamlessly; no cut-out halo, no ghosting, no blurred patches.
平台合规 视具体问题调整构图或去除违规元素

闭环写法:

生成 → detect-task → 命中项 → 取修正句 → 追加到原 prompt → 重跑 → 再检测

3、批量抽检

批量出图后不必全检(成本 3 credits/张,但人工看报告的时间是瓶颈)。建议:

场景 抽检比例
新规范段的首批 100%
规范已验证的批次 10% ~ 20% 随机
带人物的图 提高到 30%(手和脸最容易崩)
纯商品图无人物 5% 即可

批量脚本见第五节 command examples。把 高风险 的 SKU 自动打回重跑队列。


4、工具调用

本技能使用 dLazy 的 claude-sonnet-5(具备图像理解能力的文本模型;本技能要的是判断与结构化报告而不是图片,需要能逐项审查画面并写出可执行的修正建议——单张约 3 credits)。

调用方式

两种等价写法,选一种。统一入口会自动选后端、失败重试、建目录落盘、估算成本:

# A. 统一入口(推荐):可切任意后端,加 --dry-run 不计费空跑
node scripts/gen.mjs --task detect-task \
  --prompt '<见下方 Prompt 模板>' \
  --images <按下表顺序> \
  --save output/detect-task-<sku>.jpg

# B. 直接用 dLazy CLI(不想引入 Node 依赖时,效果等价)
dlazy claude-sonnet-5 --prompt '...' --images ... --save output/detect-task.jpg

参数约定(本技能固定用法)

参数 取值 理由
--images [待检图](最多 10 张,可一次送多张同批图对比) 单张检测最准;多张适合看整批一致性
--prompt 固定的质检 prompt(见第五节模板) 整个项目用同一份,否则报告不可比
--batch 1 检测不需要多样性
--no-wait 批量抽检时开启 先提交后统一收结果

取结果:文本模型的输出在 result.data.texts[0](不是 urls)。

dlazy claude-sonnet-5 --prompt '...' --images a.jpg \
  | python3 -c 'import sys,json;print(json.load(sys.stdin)["result"]["data"]["texts"][0])'

dlazy --format text <tool> 也可以把纯文本打到 stdout,注意 --format 是全局选项,必须写在子命令之前。

Command Examples

# basic call: 单张检测
dlazy claude-sonnet-5 \
  --prompt '你是电商投放前的图片质检员。审查这张 AI 生成的商拍图能否直接投放,输出风险等级、8 项风险的逐条判定、投放建议,以及应追加到生成 prompt 的英文修正句。只输出报告。' \
  --images docs/detect-task/candidate.jpg \
  | python3 -c 'import sys,json;print(json.load(sys.stdin)["result"]["data"]["texts"][0])'

# complex call: 固定质检 prompt + 批量抽检 + 高风险自动打回
QC='你是电商投放前的图片质检员。审查这张 AI 生成的服装商拍图能否直接用于电商投放。全部用中文作答(第 4 项的 prompt 修正句除外)。严格按以下结构输出:

### 延伸阅读

| 要查什么 | 去哪 |
| --- | --- |
| 认证、多后端配置、输出结构、错误码 | [`references/provider-cli.md`](references/provider-cli.md) |
| `claude-sonnet-5` 的全部可用参数 | [`references/model-flags.md`](references/model-flags.md) |
| 统一入口的全部选项 | `node scripts/gen.mjs --help` |

## 1. 风险等级
低风险 / 中风险 / 高风险(三选一)
## 2. 风险项逐条判定
用表格输出,三列:风险项 / 结论(通过 或 命中)/ 证据。风险项固定为这 8 条:商品崩坏、人脸不自然、手部异常、肢体结构错误、文字乱码、光影矛盾、边缘融合痕迹、平台合规。
## 3. 投放建议
建议投放 / 建议重跑 / 建议人工修图
## 4. 修正建议
若建议重跑或人工修图,给出应追加到生成 prompt 的英文修正句 1-3 条;若建议投放,写「无需修正」。
只输出报告,不要寒暄。'

mkdir -p docs/detect-task/reports
: > docs/detect-task/rerun-queue.txt

for f in docs/batch-image/out/*.jpg; do
  SKU=$(basename "$f" .jpg)
  dlazy claude-sonnet-5 --prompt "$QC" --images "$f" 2>/dev/null \
    | python3 -c 'import sys,json;print(json.load(sys.stdin)["result"]["data"]["texts"][0])' \
    > "docs/detect-task/reports/${SKU}.md"
  if grep -q '高风险' "docs/detect-task/reports/${SKU}.md"; then
    echo "$SKU" >> docs/detect-task/rerun-queue.txt
  fi
done

echo "需要重跑:$(wc -l < docs/detect-task/rerun-queue.txt) 个 SKU"

# 先估价不真跑
dlazy claude-sonnet-5 --dry-run --prompt '...' --images a.jpg

Error Handling

Code Error Type Example Message
401 Unauthorized (No API Key) ok: false, code: "unauthorized", message: "API key is missing or invalid"
501 Missing required parameter error: required option '--prompt <prompt>' not specified
502 Local file read error Error: Image file/Video file not found: C:\path\to\your\file
503 API request failed (no balance) ok: false, code: "insufficient_balance"
503 API request failed (server error) HTTP status code error (500 server crash)
504 Asynchronous task execution failed === Generation Failed === / {Specific error reason returned by backend, for example "Prompt violates safety policy"}

AGENT CRITICAL INSTRUCTION:

  1. If the execution result returns code: "insufficient_balance", you MUST explicitly inform the user that their credits are insufficient and guide them to recharge: https://dlazy.com/dashboard/organization/settings?tab=credits
  2. If the execution result returns code: "unauthorized" or indicates missing API key, you MUST inform the user to get their API key from https://dlazy.com/dashboard/organization/api-key and save it using dlazy auth set <key> and resume the task.

5、Prompt 模板

这份 prompt 应该在整个项目里固定不变,否则不同批次的报告没法比较。

你是电商投放前的图片质检员。审查这张 AI 生成的[品类]商拍图能否直接用于电商投放。
全部用中文作答(第 4 项的 prompt 修正句除外)。严格按以下结构输出:

## 1. 风险等级
低风险 / 中风险 / 高风险(三选一)

## 2. 风险项逐条判定
用表格输出,三列:风险项 / 结论(通过 或 命中)/ 证据。
风险项固定为这 8 条:商品崩坏、人脸不自然、手部异常、肢体结构错误、
文字乱码、光影矛盾、边缘融合痕迹、平台合规。

## 3. 投放建议
建议投放 / 建议重跑 / 建议人工修图

## 4. 修正建议
若建议重跑或人工修图,给出应追加到生成 prompt 的英文修正句 1-3 条;
若建议投放,写「无需修正」。

只输出报告,不要寒暄。

可选的加强项

需求 追加到 prompt
要和原商品图比对 多传一张原图,并写 图1 是待检图,图2 是原始商品图,逐项比对商品保真度。
要打分便于排序 在风险等级后追加一个 0-100 的可投放分数。
要卡特定平台规则 额外检查以下平台规则:[规则清单]。
要机器可读 以 JSON 输出,字段为 risk_level / items[] / recommendation / fixes[]。

6、执行流程

  1. 固定质检 prompt(第五节模板),整个项目复用。
  2. 单张检测:取 result.data.texts[0] 得到报告。
  3. 读第 3 项:建议投放 → 上架;建议人工修图 → 转修图;建议重跑 → 下一步。
  4. 取第 4 项的修正句,追加到原生成 prompt 末尾,重跑。
  5. 再检测一次——确认修正生效,别盲信一次重跑。
  6. 批量场景:按第四节的比例抽检,高风险 自动进重跑队列。
  7. 人工终审:模型有误报漏报,上架前仍需人眼扫一遍。

7、常见问题

现象 原因 处理
报告输出英文 未强制语言 prompt 里写明「全部用中文作答」
拿不到结果 取错了字段 文本模型的结果在 data.texts[0],不是 urls
--format text 报错 全局选项位置错 --format 要写在子命令之前
不同批次报告没法比 质检 prompt 每次都改 固定一份 prompt 全项目复用
明显崩坏没被检出 模型漏报 提高抽检比例;上架前人工终审
正常图被判高风险 模型误报 看第 2 项的证据描述再决定,不要只看等级
修正句不够具体 报告太笼统 追加「要和原商品图比对」的加强项,多传一张原图

Tips

Visit https://dlazy.com for more information.

Files (ecommerce-skills)
  • examples
    • brand.yaml 1.6 KB
      Loading…
  • references
    • model-flags.md 1.5 KB
      Loading…
    • platform-specs.md 2.1 KB
      Loading…
    • provider-cli.md 4.7 KB
      Loading…
  • scripts
    • lib
      • miniyaml.mjs 2.8 KB · in bundle
      • providers.mjs 11.9 KB · in bundle
      • tasks.json 3.1 KB
        Loading…
    • brand.mjs 4.4 KB · in bundle
    • check_listing.py 15.6 KB
      Loading…
    • gen.mjs 9.3 KB · in bundle
    • run_loop.mjs 9.5 KB · in bundle
  • skill.md 14 KB
    ---
    name: detect-task
    description: 投前 AI 图真实性质检。待检图 → 风险等级 + 8 项逐条判定 + 可直接追加到 prompt 的修正句,可自动重跑直到达标。当用户说「投前检测」「图片质检」「检查有没有崩」「上架前把关」「这图能不能用」时使用。
    ---
    
    # detect-task — 投放前 AI 图真实性检测
    
    AI 生图上架前的**最后一道关**。判断这张图能不能直接投,崩在哪里,怎么修。
    
    和其他技能的区别:本技能**不生成图片,输出的是判断**。它的价值在于把「生成 → 检测 → 重跑」闭起来——检测报告里直接给出该追加到 prompt 的修正句。
    
    ---
    
    ## 生成效果示例
    
    | 输入:待检图 |
    | --- |
    | <img src="../../docs/detect-task/candidate.jpg" width="280"> |
    | `candidate.jpg` — 由 [flat-lay](../flat-lay/skill.md) 生成的军绿毛衣模特上身图,1024×1536 |
    
    实际执行的命令:
    
    ```bash
    dlazy claude-sonnet-5 \
      --prompt '你是电商投放前的图片质检员。审查这张 AI 生成的服装商拍图能否直接用于电商投放。全部用中文作答(第 4 项的 prompt 修正句除外)。严格按以下结构输出:
    ## 1. 风险等级
    低风险 / 中风险 / 高风险(三选一)
    ## 2. 风险项逐条判定
    用表格输出,三列:风险项 / 结论(通过 或 命中)/ 证据。风险项固定为这 8 条:商品崩坏、人脸不自然、手部异常、肢体结构错误、文字乱码、光影矛盾、边缘融合痕迹、平台合规。
    ## 3. 投放建议
    建议投放 / 建议重跑 / 建议人工修图
    ## 4. 修正建议
    若建议重跑或人工修图,给出应追加到生成 prompt 的英文修正句 1-3 条;若建议投放,写「无需修正」。
    只输出报告,不要寒暄。' \
      --images docs/detect-task/candidate.jpg \
      | python3 -c 'import sys,json;print(json.load(sys.stdin)["result"]["data"]["texts"][0])' \
      > docs/detect-task/example-report.md
    ```
    
    **输出**:完整报告见 [`docs/detect-task/example-report.md`](../../docs/detect-task/example-report.md),3 credits。摘要:
    
    - **风险等级**:低风险
    - **8 项判定**:7 项通过;`文字乱码` 命中(轻微)——左侧袖口的织标图案模糊不可辨
    - **投放建议**:建议人工修图(仅需局部处理袖口小标签)
    - **修正建议**:`clear and legible brand tag/logo embroidery on cuff, sharp fine detail, no blurry or garbled text`
    
    这条修正句可以直接追加到 flat-lay 的原 prompt 末尾重跑——这就是闭环。
    
    ---
    
    ## 1、能力边界
    
    | 输出 | 说明 |
    | --- | --- |
    | 风险等级 | `低风险` / `中风险` / `高风险` |
    | 风险项逐条判定 | 8 项,每项给出 `通过` / `命中` + 一句证据 |
    | 投放建议 | `建议投放` / `建议重跑` / `建议人工修图` |
    | 修正建议 | 可直接追加到生成 prompt 的英文修正句 |
    
    **8 项风险清单**
    
    | # | 风险项 | 看什么 |
    | --- | --- | --- |
    | 1 | 商品崩坏 | 款式、织法、印花、logo 位置是否失真 |
    | 2 | 人脸不自然 | 五官比例、皮肤质感、眼神 |
    | 3 | 手部异常 | 手指数量与形态 |
    | 4 | 肢体结构错误 | 肩线、四肢数量与朝向 |
    | 5 | 文字乱码 | 画面内任何文字 |
    | 6 | 光影矛盾 | 投影方向与光源是否一致 |
    | 7 | 边缘融合痕迹 | 抠图边、鬼影、糊块 |
    | 8 | 平台合规 | 是否含违规元素 |
    
    **不做**:不替代人工终审(模型判断有误报漏报);不做法律与平台规则的最终裁定;不用于给明显违规的图背书。
    
    ---
    
    ## 2、报告要能直接驱动重跑
    
    检测的意义不是打分,而是**告诉生成环节要改什么**。所以报告的第 4 项必须是**可直接复制到 prompt 的英文句子**。
    
    典型映射:
    
    | 命中项 | 应追加到生成 prompt 的修正句 |
    | --- | --- |
    | 商品崩坏 | `Cross-check the garment against the reference: [关键特征] must match exactly.` |
    | 人脸不自然 | `Photorealistic human face: correct facial proportions, natural skin pores and subsurface scattering, natural gaze.` |
    | 手部异常 | `Hands anatomically correct — five distinct fingers per hand, natural knuckles, no fused or extra digits.` |
    | 肢体结构错误 | `Correct anatomy: symmetric shoulders, two arms and two legs, no extra or missing limbs, no impossible joint angles.` |
    | 文字乱码 | `No text anywhere in the image.` 或(需要文字时)`All text must be clear, correctly formed [语言] characters.` |
    | 光影矛盾 | `Single consistent light source from [方向]; all shadows must fall in the same direction.` |
    | 边缘融合痕迹 | `Blend all edges seamlessly; no cut-out halo, no ghosting, no blurred patches.` |
    | 平台合规 | 视具体问题调整构图或去除违规元素 |
    
    **闭环写法**:
    
    ```
    生成 → detect-task → 命中项 → 取修正句 → 追加到原 prompt → 重跑 → 再检测
    ```
    
    ---
    
    ## 3、批量抽检
    
    批量出图后不必全检(成本 3 credits/张,但人工看报告的时间是瓶颈)。建议:
    
    | 场景 | 抽检比例 |
    | --- | --- |
    | 新规范段的首批 | 100% |
    | 规范已验证的批次 | 10% ~ 20% 随机 |
    | 带人物的图 | 提高到 30%(手和脸最容易崩) |
    | 纯商品图无人物 | 5% 即可 |
    
    批量脚本见第五节 command examples。把 `高风险` 的 SKU 自动打回重跑队列。
    
    ---
    
    ## 4、工具调用
    
    本技能使用 dLazy 的 **`claude-sonnet-5`**(具备图像理解能力的文本模型;本技能要的是**判断与结构化报告**而不是图片,需要能逐项审查画面并写出可执行的修正建议——单张约 3 credits)。
    
    ### 调用方式
    
    两种等价写法,选一种。统一入口会自动选后端、失败重试、建目录落盘、估算成本:
    
    ```bash
    # A. 统一入口(推荐):可切任意后端,加 --dry-run 不计费空跑
    node scripts/gen.mjs --task detect-task \
      --prompt '<见下方 Prompt 模板>' \
      --images <按下表顺序> \
      --save output/detect-task-<sku>.jpg
    
    # B. 直接用 dLazy CLI(不想引入 Node 依赖时,效果等价)
    dlazy claude-sonnet-5 --prompt '...' --images ... --save output/detect-task.jpg
    ```
    
    **参数约定(本技能固定用法)**
    
    | 参数 | 取值 | 理由 |
    | --- | --- | --- |
    | `--images` | `[待检图]`(最多 10 张,可一次送多张同批图对比) | 单张检测最准;多张适合看整批一致性 |
    | `--prompt` | 固定的质检 prompt(见第五节模板) | **整个项目用同一份**,否则报告不可比 |
    | `--batch` | `1` | 检测不需要多样性 |
    | `--no-wait` | 批量抽检时开启 | 先提交后统一收结果 |
    
    **取结果**:文本模型的输出在 `result.data.texts[0]`(不是 `urls`)。
    
    ```bash
    dlazy claude-sonnet-5 --prompt '...' --images a.jpg \
      | python3 -c 'import sys,json;print(json.load(sys.stdin)["result"]["data"]["texts"][0])'
    ```
    
    > `dlazy --format text <tool>` 也可以把纯文本打到 stdout,注意 `--format` 是**全局**选项,必须写在子命令**之前**。
    
    ### Command Examples
    
    ```bash
    # basic call: 单张检测
    dlazy claude-sonnet-5 \
      --prompt '你是电商投放前的图片质检员。审查这张 AI 生成的商拍图能否直接投放,输出风险等级、8 项风险的逐条判定、投放建议,以及应追加到生成 prompt 的英文修正句。只输出报告。' \
      --images docs/detect-task/candidate.jpg \
      | python3 -c 'import sys,json;print(json.load(sys.stdin)["result"]["data"]["texts"][0])'
    
    # complex call: 固定质检 prompt + 批量抽检 + 高风险自动打回
    QC='你是电商投放前的图片质检员。审查这张 AI 生成的服装商拍图能否直接用于电商投放。全部用中文作答(第 4 项的 prompt 修正句除外)。严格按以下结构输出:
    
    ### 延伸阅读
    
    | 要查什么 | 去哪 |
    | --- | --- |
    | 认证、多后端配置、输出结构、错误码 | [`references/provider-cli.md`](references/provider-cli.md) |
    | `claude-sonnet-5` 的全部可用参数 | [`references/model-flags.md`](references/model-flags.md) |
    | 统一入口的全部选项 | `node scripts/gen.mjs --help` |
    
    ## 1. 风险等级
    低风险 / 中风险 / 高风险(三选一)
    ## 2. 风险项逐条判定
    用表格输出,三列:风险项 / 结论(通过 或 命中)/ 证据。风险项固定为这 8 条:商品崩坏、人脸不自然、手部异常、肢体结构错误、文字乱码、光影矛盾、边缘融合痕迹、平台合规。
    ## 3. 投放建议
    建议投放 / 建议重跑 / 建议人工修图
    ## 4. 修正建议
    若建议重跑或人工修图,给出应追加到生成 prompt 的英文修正句 1-3 条;若建议投放,写「无需修正」。
    只输出报告,不要寒暄。'
    
    mkdir -p docs/detect-task/reports
    : > docs/detect-task/rerun-queue.txt
    
    for f in docs/batch-image/out/*.jpg; do
      SKU=$(basename "$f" .jpg)
      dlazy claude-sonnet-5 --prompt "$QC" --images "$f" 2>/dev/null \
        | python3 -c 'import sys,json;print(json.load(sys.stdin)["result"]["data"]["texts"][0])' \
        > "docs/detect-task/reports/${SKU}.md"
      if grep -q '高风险' "docs/detect-task/reports/${SKU}.md"; then
        echo "$SKU" >> docs/detect-task/rerun-queue.txt
      fi
    done
    
    echo "需要重跑:$(wc -l < docs/detect-task/rerun-queue.txt) 个 SKU"
    
    # 先估价不真跑
    dlazy claude-sonnet-5 --dry-run --prompt '...' --images a.jpg
    ```
    
    ### Error Handling
    
    | Code | Error Type                         | Example Message                                                                                                          |
    | ---- | ---------------------------------- | ------------------------------------------------------------------------------------------------------------------------ |
    | 401  | Unauthorized (No API Key)          | `ok: false, code: "unauthorized", message: "API key is missing or invalid"`                                              |
    | 501  | Missing required parameter         | `error: required option '--prompt <prompt>' not specified`                                                                |
    | 502  | Local file read error              | `Error: Image file/Video file not found: C:\path\to\your\file`                                                            |
    | 503  | API request failed (no balance)    | `ok: false, code: "insufficient_balance"`                                                                                |
    | 503  | API request failed (server error)  | `HTTP status code error (500 server crash)`                                                                              |
    | 504  | Asynchronous task execution failed | `=== Generation Failed ===` / `{Specific error reason returned by backend, for example "Prompt violates safety policy"}`  |
    
    > **AGENT CRITICAL INSTRUCTION**:
    > 1. If the execution result returns `code: "insufficient_balance"`, you MUST explicitly inform the user that their credits are insufficient and guide them to recharge: [https://dlazy.com/dashboard/organization/settings?tab=credits](https://dlazy.com/dashboard/organization/settings?tab=credits)
    > 2. If the execution result returns `code: "unauthorized"` or indicates missing API key, you MUST inform the user to get their API key from [https://dlazy.com/dashboard/organization/api-key](https://dlazy.com/dashboard/organization/api-key) and save it using `dlazy auth set <key>` and resume the task.
    
    ---
    
    ## 5、Prompt 模板
    
    **这份 prompt 应该在整个项目里固定不变**,否则不同批次的报告没法比较。
    
    ```text
    你是电商投放前的图片质检员。审查这张 AI 生成的[品类]商拍图能否直接用于电商投放。
    全部用中文作答(第 4 项的 prompt 修正句除外)。严格按以下结构输出:
    
    ## 1. 风险等级
    低风险 / 中风险 / 高风险(三选一)
    
    ## 2. 风险项逐条判定
    用表格输出,三列:风险项 / 结论(通过 或 命中)/ 证据。
    风险项固定为这 8 条:商品崩坏、人脸不自然、手部异常、肢体结构错误、
    文字乱码、光影矛盾、边缘融合痕迹、平台合规。
    
    ## 3. 投放建议
    建议投放 / 建议重跑 / 建议人工修图
    
    ## 4. 修正建议
    若建议重跑或人工修图,给出应追加到生成 prompt 的英文修正句 1-3 条;
    若建议投放,写「无需修正」。
    
    只输出报告,不要寒暄。
    ```
    
    **可选的加强项**
    
    | 需求 | 追加到 prompt |
    | --- | --- |
    | 要和原商品图比对 | 多传一张原图,并写 `图1 是待检图,图2 是原始商品图,逐项比对商品保真度。` |
    | 要打分便于排序 | `在风险等级后追加一个 0-100 的可投放分数。` |
    | 要卡特定平台规则 | `额外检查以下平台规则:[规则清单]。` |
    | 要机器可读 | `以 JSON 输出,字段为 risk_level / items[] / recommendation / fixes[]。` |
    
    ---
    
    ## 6、执行流程
    
    1. **固定质检 prompt**(第五节模板),整个项目复用。
    2. **单张检测**:取 `result.data.texts[0]` 得到报告。
    3. **读第 3 项**:`建议投放` → 上架;`建议人工修图` → 转修图;`建议重跑` → 下一步。
    4. **取第 4 项的修正句**,追加到原生成 prompt 末尾,重跑。
    5. **再检测一次**——确认修正生效,别盲信一次重跑。
    6. **批量场景**:按第四节的比例抽检,`高风险` 自动进重跑队列。
    7. **人工终审**:模型有误报漏报,上架前仍需人眼扫一遍。
    
    ---
    
    ## 7、常见问题
    
    | 现象 | 原因 | 处理 |
    | --- | --- | --- |
    | 报告输出英文 | 未强制语言 | prompt 里写明「全部用中文作答」 |
    | 拿不到结果 | 取错了字段 | 文本模型的结果在 `data.texts[0]`,不是 `urls` |
    | `--format text` 报错 | 全局选项位置错 | `--format` 要写在子命令**之前** |
    | 不同批次报告没法比 | 质检 prompt 每次都改 | 固定一份 prompt 全项目复用 |
    | 明显崩坏没被检出 | 模型漏报 | 提高抽检比例;上架前人工终审 |
    | 正常图被判高风险 | 模型误报 | 看第 2 项的证据描述再决定,不要只看等级 |
    | 修正句不够具体 | 报告太笼统 | 追加「要和原商品图比对」的加强项,多传一张原图 |
    
    ---
    
    ## Tips
    
    Visit https://dlazy.com for more information.
    

Comments (0)

Sign in to join the conversation.

No comments yet.

Reviews (0)

No reviews yet.